_accessebility
  • ניווט בעזרת מקלדת
  • התאמת אתר לעיוורים
  • התאמה לעוורי צבעים
  • התאמה לכבדי ראיה (שחור)
  • התאמה לכבדי ראיה (לבן)
  • תצוגה רגילה
  • בטל נגישות

TEF1118P-16-150W

מחיר בנקודות: 34950 points
699
T E F1118P-16-150W is a Tenda PoE switch that offers 16 10/100 Mbps Base-TX RJ45 ports, 1 10/100/1000 Mbps Base-T RJ45 ports, and 1 1000 Mbps Base-X SFP port. Ports 1-16 comply with the IEEE 802.3af standard (maximum PoE power output: 15.4 W) and 802.3at standard (maximum PoE power output: 30...
+

TEF1118P-16-150W is a Tenda PoE switch that offers 16 10/100 Mbps Base-TX RJ45 ports, 1 10/100/1000 Mbps Base-T RJ45 ports, and 1 1000 Mbps Base-X SFP port. Ports 1-16 comply with the IEEE 802.3af standard (maximum PoE power output: 15.4 W) and 802.3at standard (maximum PoE power output: 30 W). The switch offers a maximum PoE power output of 135 W and can supply power to and exchange data with APs, IP cameras, and IP phones through CAT5 cables. It also provides simple management modes such as CCTV, VLAN, and Extend to help reduce cabling costs of IP terminals like APs and IP cameras

CCTV: 1-8 ports support QoS,If multiple IP cameras are connected to the switch, you are recommended to enable this mode and connect the G1 or SFP1 port of this switch to the upstream device to which the monitoring computer connects. This ensures smoother monitoring video playback. 
Standard: the switch functions as a common unmanaged switch and all the ports of the switch can communicate with each other. 
VLAN: In this mode,1-16 portsof the switch cannot communicate with each other, but can communicate with the G1 and SFP1 ports.Solid DIP switch to isolate ports to prevent broadcast storm and defend DHCP spoofing. 
Extend: In this mode, the data rate of 1-8 port of the switch is limited to 10 Mbps, whereas the maximum transmission distance of the port is increased to 250 meters. All the ports of the switch can communicate with each other

Standard&Protocol

IEEE 802.3 IEEE 802.3uIEEE 802.3xIEEE 802.3af

MTBF

≥100,000hours

Indicator

16*Link/Act per device
1*G1 Link/Act per device 
1*SFP Link/Act per device 
1*PoE-MAX per device 
1*Power per device

Interface

16 10/100Base-TX ports(Data/Power) 
1 10/100/1000Base-T port(Data) 
1 1000Base-X SFP port

Lightning Protection

6KV

Store & Forward

Yes

exchange capacity

7.2 Gbit/s

Packet Forwarding Rate

5.36Mpps

MAC Address Table

4K

PoE supply management

Port 1 to Port 16 support IEEE802.3at/af POE standard

PN pass-through

1 2 4 5 +3 6 7 8 -

Input Power

AC100-240V 50/60Hz

Dimension

294*178*44mm( W x D x H )

Power Consumption

in full configuration<150W
PoE Max Power Supply
135W

Ports feature

CCTV: 1-8 ports based CoS, If multiple IP cameras are connected to the switch, you are recommended to enable this mode and connect the G1 or SFP1 port of this switch to the upstream device to which the monitoring computer connects. This ensures smoother monitoring video playback.
Standard: the switch functions as a common unmanaged switch and all the ports of the switch can communicate with each other.
VLAN: In this mode,1-16 ports of the switch cannot communicate with each other, but can communicate with the G1 and SFP1 ports.Solid DIP switch to isolate ports to prevent broadcast storm and defend DHCP spoofing.
Extend: In this mode, the data rate of 1-8 port of the switch is limited to 10 Mbps, whereas the maximum transmission distance of the port is increased to 250 meters. All the ports of the switch can communicate with each other.

Environment

Operating Temperature: 0~40 (32~104)
Storage Temperature: -40
~70 (-40~158)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing

טוב לדעת